Create a Secure Powerline Network by Pairing
Note: You can only pair two devices at a time. We recommend that you plug in the powerline devices near each
other when pairing.
Pair the Powerline Devices
1. Press the Pair button on the adapter for 1 second. Its Power LED starts blinking.
Note: If the Power LED does not blink, press the Pair button again.
2. Within 2 minutes, press the extender’s Pair button for 1 second. Its Power LED starts blinking.
3. When the extender’s Powerline LED turns on, the pairing process is complete.
Sync Wi-Fi Settings to More Extenders
If you have more extenders, simply plug in and pair each one with the existing adapter to join the network. Then the
Wi-Fi settings will automatically sync from the existing extender to the new ones.
Button Legend
Extender TL-WPA4220
To Next Page
Loading...
