TP-Link TL-WPA4220 - To Extend the Existing Wireless Network

8
Chapter 2
Initial Use
Powerline Extender
TL-WPA4220
within 2 minutes
Blinking
Powerline Adapter
(For demonstration only)
On
Blinking
5. Relocate the extender to the Wi-Fi “dead” zone. Use the SSID (network name) and
password on the label at the top of the extender.
Note: A blinking Powerline LED indicates poor signal strength. Move the extender to another location.
Now enjoy the internet!
2. 2. To Extend the Existing Wireless Network
Extend the existing wireless network by adding a new powerline extender to the existing
powerline network.
Done!
I want to:
Downloaded from ManualsNet.com search engine