5
Chapter 1
Get to Know About Your Powerline Extender
1. 3. 2. Physical Interface
Reset
Press and hold the button for at least 5 seconds until all LEDs go off to reset the
powerline extender to factory default settings.
Ethernet Port
The extender has three 10/100/1000Mbps Ethernet ports. You can use them to connect
the extender to computers or broadband devices.
Wi-Fi Button
Press and hold the button for 1 second to copy wireless settings from the main router
to the extender. Go to Wi-Fi Clone for more information.
Press and hold the button for at least 5 seconds to turn the wireless function on or off.
The wireless function is on by default. You can turn them off at night and then on in the
morning by pressing the Wi-Fi button.
LED Button
Ethernet Port
Reset Button
Pair Button
Wi-Fi Button
Power Plug
To Next Page
Loading...
