TP-Link TL-WPS510U - Factory Default Settings; Before You Start, You Should Prepare the Following Items; Hardware Installation

1
1 Before you start, you should prepare the following items
¾ Windows 2000/XP/2003/Vista computer with print server setup CD
¾ USB Printer(non-GDI/CAPT)
¾ USB Printer cable
¾ One 802.11b/g Access Point (optional)
2 Factory Default Settings
¾ Username: admin
¾ Password: 0000
¾ Wireless Mode: Ad-Hoc (Peer-to-Peer)
¾ Channel: 1
¾ SSID: WLAN-PS
¾ IP Address: 192.168.0.10
¾ Subnet Mask: 255.255.255.0
3 Hardware Installation
1) Turn off the printer’s power.
2) Connect the print server to your printer with the supplied printer cable.
3) Turn the printer’s power on.
4) Plug the AC power adapter into the power connector on the print server.
5) Wait 40 seconds as part of the print server’s Power On Self Test (POST).
4 Connecting your Computer to the Wireless Print Server
For Windows XP:
Step 1 On the Windows taskbar, click the Start->Control Panel