EasyManua.ls Logo

TP-Link TL-WR2543ND - 4.6.2 Wireless Security

TP-Link TL-WR2543ND
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR2543ND 450Mbps Dual-Band Wireless N Gigabit Router
- 43 -
Figure 4-20 Wireless Security
¾ Disable Security - If you do not want to use wireless security, check this radio button. But it’s
strongly recommended to choose one of the following modes to enable security.
¾ WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as show in Figure 4-21.
Figure 4-21 WEP
Type - you can choose the type for the WEP security on the drop-down list. The default
setting is Automatic, which can select
Shared Key or Open System authentication type
automatically based on the wireless station's capability and request.
WEP Key Format - Hexadecimal and ASCII formats are provided here. Hexadecimal

Table of Contents

Other manuals for TP-Link TL-WR2543ND

Related product manuals