- 136 -
2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.
8.6.2 Wireless Security
Choose menu “Wireless
Wireless Security”, and then you can configure the security
settings of your wireless network.
There are three wireless security modes supported by the Router: WEP (Wired Equivalent
Privacy), WPA/WPA2 and WPA-PSK/WPA2-PSK.
Figure 8-9 Wireless Security
Disable Security - The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the Router without encryption. But it’s strongly
recommended to choose one of the following modes to enable security.
WEP - It is based on the IEEE 802.11 standard.
To Next Page
Loading...
