Note:
The Router supports five working modes for multi-user to access the Internet: Router, Repeater,
Bridge, Client and AP. In Router mode, TL-WR700N can access the Internet via DSL/Cable
Modem. In Repeater mode, the device will relay data to an associated root AP. In Bridge mode,
the device bridges to another AP. In Client mode, the device will act as a wireless station to enable
wired host(s) to access AP. In AP mode, it enables the wired LAN to connect to the Internet
wirelessly. You can configure your device quickly by the following steps in different modes.
3.1.1 Router Mode
When you choose Router on Working Mode page in Figure 3-2 , take the following steps:
1. Set the required wireless parameters on the page (as shown in Figure 3-3), and then click Next.
Figure 3-3
To Next Page
Loading...
