- 17 -
5. The Finish page is shown as Figure 3-16. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.
Figure 3-16
3.1.4 Client Mode
When you choose Client on Working Mode page in Figure 3-2 , take the following steps:
1. Wait a few minutes when the device is detecting the surrounding wireless networks.
Figure 3-17
2. Choose the wireless network you would like to extend from the list available, and then click
Next.
Figure 3-18
3. Input the wireless password of the wireless network you’ve chosen, and then click Next.
To Next Page
Loading...
