4.3.5.1. LED Control
Go to “Setting→System Tools→LED Control”, and then you can turn On or Off the LEDs on
your router according to a specific time schedule.
Night Mode - Indicates whether the Night Mode is On (enabled) or Off (disabled).
LED Off Time - Select the time schedule to turn off LEDs.
4.3.5.2. Time Settings
Go to “Setting→System Tools→Time Settings”, and then you can configure the time.
Time Zone - Select your local time zone from this pull down list.
Date - Enter your local date in MM/DD/YY into the right blanks.
Time - Enter your local time in HH/MM/SS into the right blanks.
NTP Server I / NTP Server II - Enter the address or domain of the NTP Server I or NTP
Server II, and then the router will get the time from the NTP Server preferentially. In
addition, the router built-in some common NTP Servers, so it can get time automatically
once it connects the Internet.
To Next Page
Loading...
