Chapter 5. Configuration for Access Point Mode
5.1 Login and switch the working mode
Enter http://tplinkwifi.net in the address bar of a web browser. Use admin for both username
and password, and then click Login.
After your successful login, click the Mode button on the top-right corner of the Web
management page to switch the working mode of the router to Access Point.
5.2 Quick Setup
Refer to Access Point Mode -> Login and Quick Setup
5.3 Setting
Click “Setting”, then you will see the main menus on the left of the Web Management Page. On
the right, there are the corresponding explanations and instructions.
To Next Page
Loading...
