TP-Link TL-WR841HP

-75-
TL-WR841HP
300Mbps High Power Wireless N Router
3.4.12.2. Rule List
Go to “Advanced→Bandwidth Control→Rule List”, and then you can view and configure the
Bandwidth Control rules in the screen below.
 Description - This is the information about the rules such as address range.
 Egress bandwidth - This field displays the max and mix upload bandwidth through the
Internet port, the default is 0.
 Ingress bandwidth - This field displays the max and mix download bandwidth through the
Internet port, the default is 0.
 Enable - This displays the status of the rule.
 Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1. Click Add New… button on Bandwidth Control Rule List page.
2. Enter the information like the screen shown below.
3. Click the Save button.