Wired: Connect your computer to the router (LAN port) via an Ethernet cable.
Wireless: Connect wirelessly by using the SSID (network name) and password printed on
the bottom label of the router.
2.3.3.2. Login and Quick Setup
1. Enter http://tplinkwifi.net in the address bar of a web browser. Use admin for both
username and password, and then click Login.
Note:
If the above screen does not pop-up, it means that your IE Web-browser has been set to a
proxy. Go to Tools menu > Internet Options > Connections > LAN Settings, in the screen that
appears, cancel the Using Proxy checkbox, and click OK to finish it.
2. After successfully login, follow Quick Setup to complete the configuration. For wireless
devices, you may have to reconnect to the wireless network if you have customized the
SSID (wireless name) and password during the configuration.
To Next Page
Loading...
