Bigpond Cable
If your ISP provides Bigpond Cable connection, please select Bigpond Cable option. And you
should enter the following parameters in the screen below.
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Auth Server - Enter the authenticating server IP address or host name.
Auth Domain - Type in the domain suffix server name based on your location, e.g.
NSW / ACT - nsw.bigpond.net.au
VIC / TAS / WA / SA / NT - vic.bigpond.net.au
QLD - qld.bigpond.net.au
Click Connect to connect immediately.
Click Disconnect to disconnect immediately.
Click Save to save all your settings.
L2TP/Russia L2TP
If your ISP provides L2TP connection, please select L2TP/Russia L2TP option.
To Next Page
Loading...
