Note:
If you check the WPA/WPA2-Enterprise radio button and choose TKIP encryption,
you will find a notice in red as shown below.
Radius Server IP - Enter the IP address of the Radius server.
Radius Port - Enter the port number of the Radius server.
Radius Password - Enter the password for the Radius server.
Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard.
Type - you can choose the type for the WEP security on the drop-down list. The
default setting is Automatic, which can select Shared Key or Open System
authentication type automatically based on the wireless station's capability and
request.
WEP Key Format - Hexadecimal and ASCII formats are provided here.
Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F)
in the specified length. ASCII format stands for any combination of keyboard
characters in the specified length.
To Next Page
Loading...
