TL-WR843ND 300Mbps Wireless AP/Client Router User Guide
- 28 -
4.6 Network
Figure 4-6 the Network menu
There are three submenus under the Network menu (shown in Figure 4-6): WAN, MAC Clone
and LAN. Click any of them, and you will be able to configure the corresponding function.
4.6.1 WAN
Choose menu “Network → WAN”, you can configure the IP parameters of the WAN on the
screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follows (Figure
4-7):
Figure 4-7 WAN – Dynamic IP
To Next Page
Loading...
