TP-Link tl-wr845n - Wireless MAC Filtering

TL-WR845N
300Mbps Wireless N Router
4.6.3 Wireless MAC Filtering
Choose menu “Wireless > MAC Filtering”, you can control the wireless access by configuring
the Wireless MAC Address Filtering function, shown in
the figure below.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
 MAC Address - The wireless station's MAC address that you want to filter.
 Status - The status of this entry either Enabled or Disabled.
 Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in
the figure below:
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-00-07-8A.
2. Enter a simple description of the wireless station in the Description field. For example:
Wireless station A.
-39-