5
Set up nbn
®
FTTB/N
1 Connect the power cable from your modem's Power Port to an electrical outlet.
2 Connect a phone cable from the grey DSL port on your modem to your telephone wall socket.
3 Make sure the electrical outlet for your modem is on, and press the modem's ON/OFF button.
4 Allow 20 minutes for your modem to boot up and connect automatically.
5 Check the lights on your modem. If the Internet light is green, you can start connecting your devices and getting online.
6 To plug in additional devices via Ethernet cable, simply connect the Ethernet cables to any of the four yellow LAN ports on your modem.
7 Turn to page 12 to continue your setup.
Power DSL 5GHzInternet4G 2.4GHz WPSPhoneWAN LAN 1 L AN 2 L AN 3 LAN 4 USB
ON OFF
DES-19417_VF_SMG_QSG_TPLink_Modem_NOV24.indd 5DES-19417_VF_SMG_QSG_TPLink_Modem_NOV24.indd 5 3/12/2024 11:09 AM3/12/2024 11:09 AM
To Next Page
Loading...
