Need help?Do you have a question about the TP-Link VIGI NVR1008 and is the answer not in the manual?
General| Model | VIGI NVR1008 |
|---|---|
| Video Input Channels | 8 |
| Video Output | 1 HDMI, 1 VGA |
| Recording Resolution | Up to 8MP |
| USB Interface | 2 × USB 2.0 |
| Power Consumption | ≤ 10W |
| Operating Humidity | 10% to 90% (non-condensing) |
| HDMI Output Resolution | 4K (3840×2160) |
| VGA Output Resolution | 1920×1080 |
| Decoding Format | H.265, H.264 |
| Decoding Capability | Up to 8MP |
| HDD Bays | 1 |
| Max HDD Capacity | 10TB per bay |
| Network Interface | 1 x 10/100/1000 Mbps Ethernet |
| Power Supply | 12 V DC |
| Operating Temperature | -10°C to +55°C |
Connect the NVR and cameras to the network device to ensure they are in the same network.
Configure and manage the NVR by following the steps to log in for the first time.
Guide through the process to set up your NVR using the Quick Setup Wizard.
Instructions for adding cameras to the NVR singly, in batches, or manually.
Flexibly configure the screen layout for displaying camera feeds in Live View and Settings.
Configure Live View settings like digital zoom, image settings, OSD, stream, and strategy.
Customize recording schedules for all channels or specific channels for daily monitoring.
Configure storage disk groups, disk quotas, and recording switches for cameras.
View and customize hard drive settings, check bad sectors, and S.M.A.R.T detection.
Play normal recordings which are video files from continuous and motion detection.
Configure motion detection settings, select triggered actions, and set alarm schedules.
Configure video tampering detection, triggered actions, and alarm schedules.
Configure NVR's IP address (dynamic or static) and advanced network settings.
Upgrade NVR firmware using Online or Local Upgrade methods.
To Next Page
