Do you have a question about the TP-Link VIGI NVR1008H and is the answer not in the manual?
Input bandwidth | 80 Mbit/s |
---|---|
Output bandwidth | 60 Mbit/s |
Maximum resolution | 1920 x 1080 pixels |
Video input channels | 8 channels |
Supported resolutions | 1920 x 1080, 1280 x 720, 1440 x 900, 1280 x 1024 |
Video recording modes | 1080p |
Number of simultaneously playbacked channels | 4 channels |
Product color | Black |
Rack capacity | 1U |
Rack mounting | Yes |
Wi-Fi | No |
HDD capacity | 0 GB |
HDD interface | Serial ATA |
Maximum storage capacity | 0 TB |
Number of HDDs installed | 0 |
Number of HDDs supported | 1 |
USB 2.0 ports quantity | 2 |
Power supply | 18 W |
Output voltage | 12 V |
Operating temperature (T-T) | -10 - 55 °C |
Harmonized System (HS) code | 85219000 |
Depth | 148.2 mm |
---|---|
Width | 246.2 mm |
Height | 42.6 mm |
Weight | 578.5 g |
Package depth | 296.5 mm |
Package width | 277.5 mm |
Package height | 64.5 mm |
Package weight | 1070 g |
Connect the NVR, cameras, and network devices to set up the system.
Initial login process for the NVR, setting passwords and basic configurations.
Step-by-step guide for initial NVR configuration using the setup wizard.
Adding cameras to the NVR, including manual and batch methods.
Modify camera names, network settings, firmware, and manage devices.
Customize the display of camera feeds across multiple screens.
Set up schedules for continuous or motion-triggered recording.
Manage storage disk groups and disk quotas for recordings.
View, configure, and check the status of the NVR's hard drives.
Save recorded video clips to an external storage device.
Search and play recorded video files from a specific day.
Configure motion detection parameters and triggered alarm actions.
Set up IP address, subnet mask, and gateway for network connectivity.
Update the NVR's firmware for new features and security patches.
Steps to reset the NVR password if forgotten.