TP-Link VIGI NVR1008H User Manual

4
Chapter 1 Get Started
1. Set the login password for your NVR and preset a password for the cameras. Enter a password
reset email for your NVR and cameras, which is used to reset the password if you forgot it. Click
Complete.
New Password Set the password of your NVR.
Confirm Password Confirm the password of your NVR.
Password Reset
Email for NVR
Set an email address to reset the password of your NVR.
Camera’s Password
Set a password for cameras added to your NVR. The password will be
applied to the cameras without passwords.
Password Reset
Email for Camera
Set an email address to reset the passwords of your cameras.
Same as the NVR
(Optional) Click the checkbox if you want to apply the password and the
email address of the NVR to your cameras.

TP-Link VIGI NVR1008H Specifications

General

Input bandwidth	80 Mbit/s
Output bandwidth	60 Mbit/s
Maximum resolution	1920 x 1080 pixels
Video input channels	8 channels
Supported resolutions	1920 x 1080, 1280 x 720, 1440 x 900, 1280 x 1024
Video recording modes	1080p
Number of simultaneously playbacked channels	4 channels
Product color	Black
Rack capacity	1U
Rack mounting	Yes
Wi-Fi	No
HDD capacity	0 GB
HDD interface	Serial ATA
Maximum storage capacity	0 TB
Number of HDDs installed	0
Number of HDDs supported	1
USB 2.0 ports quantity	2
Power supply	18 W
Output voltage	12 V
Operating temperature (T-T)	-10 - 55 °C
Harmonized System (HS) code	85219000

Weight and Dimensions

Depth	148.2 mm
Width	246.2 mm
Height	42.6 mm
Weight	578.5 g
Package depth	296.5 mm
Package width	277.5 mm
Package height	64.5 mm
Package weight	1070 g