TP-Link VIGI NVR1008H Quick Installation Guide

Product Overview
Hard Drive Installation
Quick Installation Guide
Network Video Recorder
Package Contents
Network Video Recorder
Network Video Recorder
Quick Installation Guide
Mouse
Power Adapter HDD Screws
Network Video Recorder
LAN
HDD
POWER
USB
Network Status
Indicator
Hard Disk Drive
Indicator
Power Status
Indicator
On
On
O
Network is working properly.
The network is malfunctioning.
Data is being transmitted or received.
The HDD is normal.
The NVR is powered on.
No HDD or the HDD is malfunctioning.
On
Flashing
O
LAN
HDD
POWER
Indicator Name Status Description
O The NVR is powered o.
1
3
2
2. Attach the 4 included HDD screws to your hard drive. Do not fasten.
1. Remove the xing screws on the side and back panels to open the
cover of the NVR.
Front Panel
Back Panel
For the rst time installation, please prepare a 3.5-inch hard disk drive (HDD). It is recommended to use the HDD of surveillance or enterprise
level. Before installation, please disconnect the power from the network video recorder (NVR).
POWER AUDIO OUT
VGA
HDMI
LAN
AUDIO IN
3. Match the 4 screws on the HDD with the 4 holes on the NVR, and insert
the HDD interface into the slot.
4. Flip the NVR upside down and fasten the HDD screws. Replace the
cover and fasten the screws of the NVR.
Hard Disk Drive (HDD)
POWER
VGA
LAN
AUDIO IN
AUDIO OUT
USB
(Front Panel)
Interface Description
2 USB ports for additional devices* such as USB mouse, USB storage device,
and USB keyboard.
Output port for analog video signals.
Connect your monitor to this port if it uses VGA connection.
RJ45 10/100Mbps self-adaptive Ethernet port.
Connect to an Ethernet device (eg. router and switch).
AUDIO IN /
AUDIO OUT
VGA
HDMI
POWER Connector for power input.
LAN
Output port for high-denition audio and video signals. Connect
your monitor to this port if it uses HDMI connection.
Connector for audio input and output.
Note: Audio input only supports microphones with power supply.
POWERUSB HDD LAN
*Images may dier from actual products.
©2021 TP-Link 7106509295 REV1.2.1

TP-Link VIGI NVR1008H Specifications

General

Input bandwidth	80 Mbit/s
Output bandwidth	60 Mbit/s
Maximum resolution	1920 x 1080 pixels
Video input channels	8 channels
Supported resolutions	1920 x 1080, 1280 x 720, 1440 x 900, 1280 x 1024
Video recording modes	1080p
Number of simultaneously playbacked channels	4 channels
Product color	Black
Rack capacity	1U
Rack mounting	Yes
Wi-Fi	No
HDD capacity	0 GB
HDD interface	Serial ATA
Maximum storage capacity	0 TB
Number of HDDs installed	0
Number of HDDs supported	1
USB 2.0 ports quantity	2
Power supply	18 W
Output voltage	12 V
Operating temperature (T-T)	-10 - 55 °C
Harmonized System (HS) code	85219000

Weight and Dimensions

Depth	148.2 mm
Width	246.2 mm
Height	42.6 mm
Weight	578.5 g
Package depth	296.5 mm
Package width	277.5 mm
Package height	64.5 mm
Package weight	1070 g