Do you have a question about the TP-Link Kasa Smart KP200 and is the answer not in the manual?
Model | KP200 |
---|---|
Brand | TP-Link |
Type | Smart Plug |
Wi-Fi Standard | IEEE 802.11b/g/n |
Wireless Standard | IEEE 802.11b/g/n |
Wireless Frequency | 2.4 GHz |
Frequency | 2.4 GHz |
Maximum Load | 15 A |
Input Voltage | 120VAC |
Output Voltage | 120VAC |
Mobile App | Kasa Smart |
Security | WPA/WPA2 |
Operating Temperature | 0°C to 40°C |
Compatibility | Amazon Alexa, Google Assistant |
Certification | FCC |
System Requirement | iOS 9.0 or higher, Android 4.4 or higher |
Button | Power Button |
Operating Humidity | 5%~90%RH, Non-condensing |
Get the Kasa Smart app from the App Store or Google Play.
Select the Smart Outlet from the app to add it to your account.
Step-by-step guide for physical installation, including wiring the outlet.
Instructions on identifying and disconnecting old outlet wires.
Connect new wires and install the outlet into the wallbox.
Turn on power and verify the Wi-Fi indicator light status.
Connect the device to your Wi-Fi network via the Kasa app.
Set automatic on/off times for devices according to your daily routine.
Methods to restore the outlet to factory settings.
Remove the device from Kasa account and reset to factory defaults.
Reset the device via its settings in the Kasa app.
Reset the device by pressing and holding the control button.
Set actions based on camera motion detection events.
Link smart switch actions to control other smart devices.
Automate scene activation at specific scheduled times.
Set devices to turn off automatically after a specified period.
Link Kasa account with Amazon Alexa for voice control.
Complete the account linking process between Kasa and Alexa.
Connect Kasa devices to Google Home for voice control.