Need help?Do you have a question about the TP-Link CPE Series and is the answer not in the manual?
General| Model | CPE Series |
|---|---|
| Wireless Standards | IEEE 802.11a/n |
| Frequency | 5 GHz |
| Antenna | Directional |
| Wireless Security | WPA/WPA2, WPA-PSK/WPA2-PSK |
| Operating Modes | Access Point, Client, Repeater, Bridge |
| Power Supply | Passive PoE (Power over Ethernet) |
| Operating Temperature | -30°C to 70°C |
| Storage Temperature | -40°C~70°C (-40℉~158℉) |
| Humidity | 10%~90% non-condensing |
| Enclosure | Weatherproof design |
| Chipset | Atheros |
| RAM | Varies by Model |
| Flash Memory | Varies by Model |
| Ethernet Ports | 1 |
Configures the device to act as a central hub for wireless LAN clients, supporting multiple SSIDs.
Connects the device to a wired device, acting as a wireless adapter to receive signals.
Extends wireless signal coverage by copying and reinforcing existing signals.
Borrows existing wireless internet and broadcasts it using a different SSID and password.
Allows multiple users to share the internet, acting as a wireless access point.
Enables multiple users to share a WISP-provided internet connection.
To Next Page
