3
Appearance
Smart Wi-Fi Outlet has 2 individual smart outlets, with control buttons to turn on/o devices plugged in. The System LED changes color according to
its status. See the explanation below:
Smart Outlet * 2
Plug in your device and control it from your smartphone.
Each outlet is independent.
Control Button * 2
· Press the button to turn on or o the corresponding outlet.
· Press and hold a button for 5s to re-enter setup mode.
· Press and hold a button for 10s to restore KP200 to factory default settings.
Green
Connected to Wi-Fi network successfully
Blinking Amber
Resetting
Blinking Green
Searching for Wi-Fi
Red
No Wi-Fi connection
Blinking Amber and Green
Ready for setup
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
