TP-Link WPS510U User Manual

1
Before you start, you should prepare the following items
¾ Windows 2000/XP/2003/Vista computer with print server setup CD
¾ USB Printer(non-GDI/CAPT)
¾ USB Printer cable
¾ One 802.11b/g Access Point (optional)
Hardware Installation
1. Turn off the printer’s power.
2. Connect the print server to your printer with the supplied printer cable. The
following image is the classic infrastructure topology for reference:
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the print server.
5. Wait 40 seconds as part of the print server’s Power On Self Test (POST).
Factory Default Settings
¾ Username: admin
¾ Password: 0000
¾ Wireless Mode: Ad-Hoc (Peer-to-Peer)
¾ Channel: 1
¾ SSID: WLAN-PS
¾ IP Address: 192.168.0.10
¾ Subnet Mask: 255.255.255.0

TP-Link WPS510U Specifications

General

Interface	USB 2.0
Compatible Printers	Most USB printers
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Network Protocols	TCP/IP
Wireless Standards	IEEE 802.11b, IEEE 802.11g
Security	WEP
Management	Web-based
Ports	USB 2.0 Port
Standards	IEEE 802.11b, IEEE 802.11g, USB 2.0
Operating Temperature	0℃~50℃ (32℉~122℉)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Wireless Data Rates	11g: Up to 54Mbps (dynamic), 11b: Up to 11Mbps (dynamic)