15
3.6 Time/ Date
This is where you enter the date and time and select the date format. The date and
time are displayed in the main menu.
Set Time
1. Select Setup in the main menu and press OK.
2. Use the arrow buttons to select Time/Date and press OK. The following options
display:
• Set Time
• Set Date
• Date Format
3. Select the option you want to change and press OK.
Use the arrow buttons to change the hours and minutes under the Set Time
options. Pressing OK activates the next field. When you have finished setting the
time and press OK, the DG0020 automatically displays the Set Date screen. After you
have set the date, the Time/Date menu displays again. The BACK option is selected.
Set Date
To set the date format, select Date Format and press OK.
The following date formats are available:
dd-mm-yyyy Day-Month-Year
mm-dd-yyyy Month-Day-Year
yyyy-mm-dd Year-Month-Day
yyyy/mm/dd Year/Month/Day
Use the arrow buttons to select the date format and press OK. The Time/Date menu
displays again.
3.7 Power saving (battery)
The Power saving option enables you to determine how long it takes before the
TQC Sheen Glossmeter powers itself off after a button was last pressed. The default
time is 10 minutes.
1. Select Setup in the menu.
2. Select Power saving and press OK. The time you set displays in minutes.
3. Use the arrow buttons to change the number of minutes and press OK. The
Setup menu displays again.
3.8 Language
The menu option enables you to choose the language you want to display the
device's menus in. You can choose from English, German, Dutch, French, Italian and
Spanish.
To Next Page
Loading...
