TRACE ELLIOT SMC RANGE - TECHNICAL SPECIFICATIONS; Input and Output Specs; EQ and Compression Parameters; Performance Metrics

SMC SERIES PREAMP SPECIFICATIONS
Inputs Passive Bass Input Impedance 2 MΩ
Signal Range 50mV to 10V peak to peak
Active Bass Input Impedance 100kΩ
Signal Range 100mV to 20V peak to peak
Effects Return Impedance 22kΩ
Signal Level -10dBv
Outputs Effects Send Impedance 22kΩ
Nominal Level -10dBv
Line Out Impedance 1kΩ
Nominal Level 0dBv
DI Output Impedance 600 Ω Balanced
Nominal Level 600mV peak to peak
EQ Graphic +/- 15dB at 7 centre frequencies
Mid Pre Shape +6dB @ 50Hz & 2kHz, -6dB @ 400Hz
Compression Dual Band Compression, Crossover point 350Hz
Maximum compression ratio 20:1
Frequency Response -3dB @ 20Hz & 22kHz
Signal/Noise Ratio Better than 80dB (EQ flat, mid & comp out)
Distortion Less than 0.05% THD
10