Need help?Do you have a question about the TRACE ELLIOT Tramp and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Effects Loop | Yes |
| DI Output | Yes |
| Type | Bass Amplifier |
| Speaker Configuration | 1x15" |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
Explains the three ways the Tramp Tube range achieves a valve amplifier feel.
Outlines the amplifier's channels, reverb, and effects loop.
Describes the high impedance input jack for guitars.
Details the volume control for channel one, its voicing, and overdrive characteristics.
Covers Channel One EQ, selection switch, and LED indicator.
Details Channel Two Gain, Boost, and mode selection switch.
Explains Channel Two/Three EQ and the Level control.
Describes the effects loop and the digital chorus effect.
Details the Reverb effect and Master Volume controls.
Explains Master Volume Boost and the Power On LED.
Covers mains inlet, fuse, power switch, and speaker outputs.
Details the Boost/chorus and Channel/gain footswitch sockets.
Lists input impedance, sensitivity, gain, effects send/return, and load impedance.
Details output power, loudspeaker type, preamp valve, and reverb type.
Covers fuse replacement, protection from elements, and service referrals.
Warns about electromagnetic fields and minimum safe distances.
Explains mains wiring colors, plug connections, and fuse ratings.
Reinforces EMC warnings regarding equipment placement and emissions.
Explains mains wiring colors, plug connections, and fuse ratings.
Reinforces EMC warnings regarding equipment placement and emissions.
To Next Page
