Trace2O METALYSER HM1000 - Menu System; Main Menu Overview

Metalyser
®
Portable HM1000 Instruction Manual v 5.0
14 www.trace2o.com
Menu System
The Metalyser
®
instrument is controlled via a system of on-screen menus. The
structure of these menus is illustrated below to assist you in navigating them.
Main Menu
Test
Methods
→
Condition
Electrode
Used to condition the working electrode with
Conditioning solution. When used as part of a
test it is used to prime the electrode to increase
sensitivity
→
Analyse
Sample
Used with Calibrate function. Calibration must be
undertaken before analyse sample can be used
→
Standard
Addition
Used to analyse samples and calculate the
unknown concentration by the addition of a
known standard
→
Calibrate
Used with analyse sample. Calibration must be
performed before analyse sample is used
→
Blank
subtraction
Used to set or replace a baseline if contaminants
are suspected in the buffer.
Data Log
→
View Log
Data Log viewing options
→
Last Result
Displays latest result and graph
System
→
Backlight
Backlight control options
→
Set date/time
Used to set the instrument date and time
→
Language
Used to select the display language
→
Charge
Battery charging options
→
Auto switch
off
Auto off select
→
Program
P/STAT
Program internal hardware (Not used in normal
operation)