Metalyser
®
Portable HM1000
Instruction Manual
v 5.0
Note: Periodically, it is good practice to check the response of the instrument and
hence the quality of the plate during the course of the day by looking at the graph of
the last result and looking for peaks. The information on this graph is very informative
and tells the operator what is happening with the results.
To see the graph, navigate to main menu, chose Data Log, then Last Result. The
result will appear first; pressing <OK> will display the graph.
Press <OK> again to exit the graph.
8. INTERFERENCE EFFECTS
The Metalyser
®
has been
designed
to test
very
low
levels
of
metals
in water and as such
is
very sensitive.
Due to the
interaction
of other
metals
and
organics
in the water source,
interferences
can occur as with any system of this type.
The Metalyser
®
is
designed
to function in water sources that might be
suitable
for
drinking.
The buffers
chosen mean that in many
instances interferences
are
unlikely
to
occur.
To Next Page
Loading...
Need help?
General
