Metalyser
®
Portable HM1000
Instruction Manual
v 5.0
In-line waterproof cable connector
Warning: Sonde head is designed for submersion up to 1 metre in water. Lowering
the head deeper than this may result in water ingress which will require sonde head
replacement.
Note: The
sonde
cable may be fixed to the lid of the Metalyser
®
box, using
the
box
closure
tabs and the
supplied
cable clamp.
Alternatively,
the user may
attach the cable to a suitable fixture at the sample site, e.g. branch, rope,
fence, barrier
.
To Next Page
Loading...
