Tracer SimRacer - Platform Specific Connections; PS3 Platform Setup; PS4 Platform Setup; Xbox 360 Platform Setup

18
Tracer SimRacer 6in1
EN
Instructions for use
6.1 PS3 Platform Functions
1. Connect all the components of the system together: the pedals and the gearbox to the
steering wheel (rear plugs on the steering wheel module – shown on page 3 of the
manual). Connect the main steering wheel cable to the console’s USB port. Turn on
the console and steering wheel.
2. Connect the steering wheel with a 4-wire USB cable to the console controller to start
(the controller should be turned on).
3. Press the MODE key of the steering wheel once to enter the XBM setting screen dur-
ing the operation of the PS3 host to display the current control. Player, long press the
MODE key for 2 seconds to enter the shutdown setting interface.
Note: This platform game currently does not support the function of 6+1 shift lever, so it is
better not to use shift lever.
6.2 PS4 Platform Functions
1. Connect all the components of the system together: the pedals and the gearbox to the
steering wheel (rear plugs on the steering wheel module – shown on page 3 of the
manual). Connect the main steering wheel cable to the console’s USB port. Turn on the
console and steering wheel.
2. Connect the steering wheel with a 4-wire USB cable to the console controller to start
(the controller should be turned on).
3. After successful guidance, the red LED on the steering wheel will light up. At this time,
press the MODE key on the steering wheel to start. You can enter the host to start the
game or set the related functions of the host.
4. In PS4 host operation, short press the MODE button on the steering wheel once to
return to the main interface, and long press for 1 second to turn o󰀨 Machine Settings
interface.
5. After connecting the shift lever, it will automatically switch and lock into steering wheel
mode. This mode can only be created when the shift lever is supported by the game.
Function, otherwise the shift lever has no function, and this mode has no vibration func-
tion in the game.
6.3 XBOX 360 Platform Functions
1. Connect all the components of the system together: the pedals and the gearbox to the
steering wheel (rear plugs on the steering wheel module – shown on page 3 of the
manual). Connect the main steering wheel cable to the console’s USB port. Turn on the
console and steering wheel.
2. Connect the steering wheel with a 4-wire USB cable to the console controller to start
(the controller should be turned on).
3. After successful boot, the red LED on the steering wheel will light up and the indicator
light on the XBOX 360 boot controller will also light up. On, you can perform related
operations on the host or enter the game.
4. Press the MODE button on the steering wheel (equivalent to the navigation button
on the original gamepad) when operating the XBOX 360. You can return to the main
screen.