TU600B
Trackunit TU600B, Technical Manual v1.0, March 2022 Page 22
SMS commands for output control
Activation of the
output
MT OUT1=ON
MTC ACK (SERIAL
No.) OUT1 ON
With this command the output is activated
permanently. The output can be de-
activated again using the “OFF” command.
Deactivation of
the output
MT OUT1=OFF
MTC ACK (SERIAL
No.) OUT1 OFF
With this command the output is
deactivated.
NOTE: For the “Send SMS” it is of no importance if small or capital letters are used in the
command string, or a mixture hereof.
Safety precautions
The use of the digital output is restricted to signals/systems/components related to
comfort applications in the vehicles.
Under no circumstances must it be used for purposes, which can influence the safety of
the vehicle when driving.
Trackunit holds no liability for any damages occurred to persons, vehicles, moving
machines, construction machines etc. caused by wrong installation and/or faulty use of
the digital output.
Warranty
Trackunit APS products are covered by a limited manufacturer warranty. The Trackunit APS
warranty is limited to the warranty rules and legislation present in each country. The warranty only
covers manufacturing faults.
The warranty does not cover misuse, wrong installation or damage due to a faulty installation or
wrong maintenance.
The invoice act as the proof of warranty, so please keep it as reference for any warranty
complaints.
Technical Assistance/Support and spare parts
Trackunit APS offers technical assistance to all our customers about the use, installation,
insurance, and spare parts:
If you have a problem and cannot find the information you need in the product
documentation, please contact Trackunit Aps.
For replacement batteries Trackunit model PN 4233.0002 or PN 4233.004 must be used,
please order at Trackunit Aps.
To Next Page
Loading...
