A
Alexis ElliottSep 12, 2025
What to do if the secondary brake will not actuate manually on my Tractel Tirak Blocstop BSO XE 1020 P Industrial Equipment?
- MMichele MartinSep 12, 2025
If the secondary brake will not actuate manually on your Tractel Industrial Equipment, it is likely due to frozen parts. DO NOT USE the unit until the brake has thawed, dried, and is in proper condition. Thawing may be accomplished by blowing ducted dry heat (200 degrees F. max.) on the brake area. DO NOT USE OPEN FLAME!