SAFETY WARNING
In the process of welding, there could be possibilities of injury, so please take
protection into consideration during operation. For more details please read the
Operator Safety Guide, which complies with the preventive requirements of the
manufacturer.
Electric shock——Can kill ！
Set the earth fitting according to applying standard.
Do not touch the bare electric parts and electrode with uncovered skin, wet gloves or clothes.
Make sure you are insulated from the ground and the work piece.
Think safety first.
Gases and fumes——May be a health hazard！
Keep your head out of the gases and fumes produced by welding.
When arc welding, ventilators or air extractors should be used to avoid breathing in the gases.
Arc rays——Harmful to your eyes and will burn your skin.
Wear suitable protective mask, light filter and protective garment to protect eyes and body.
Prepare suitable protective mask or curtain to protect bystanders.
Fire
Welding spark may cause fire, make sure there is no flammable material or liquids around the
welding area.
Noise——Excessive noises will be harmful to your hearing.
Use ear protector or others means to protect ear.
Warn bystanders that noise is harmful to hearing.
Malfunction——Use qualified technician to repair machine.
If faulty during installation and operation, please follow this manual instruction on fault
finding.
If you fail to fully understand the manual, or fail to solve the problem with the instructions,
you should contact the suppliers or the service center for professional help.
WARNING!
Earth leakage-circuit breaker should be used with this machine!!!
To Next Page
Loading...
