MACHINE DESCRIPTION
The welding machine is a rectifier adopting the most advanced inverter technology.
The development of inverter MIG welding equipment profits from the development of the inverter
power supply theory and components. Inverter MIG welding power source utilizes high-power
component MOSFET to transfer 50/60Hz frequency up to 100 KHz, then reduce the voltage and
change it to DC and then control the high-power output amperage via PWM technology. Because of
the great reduction of the main transformer’s weight and volume; the efficiency increased by 30%.
The appearance of the inverter welding equipment is considered to be a revolution for the welding
industry.
CO
2
shielded welding equipment uses the most advanced inverter technology by us. The inside of
the machine has an electronic reactor circuit which can accurately control the process of the
welding transition and therefor have excellent welding characteristic. Comparing with synergic
welding machine and other machines, it has the following advantages: stable wire speed, compact,
power saving, no electromagnetic noise, low splatter, good arcing, uniform welding pool and high
duty cycle. Continuous and stable operation with low current, especially suitable for welding sheet
of low-carbon steel, alloyed steel and stainless steel. Built in automatic voltage pulsing
compensating capability.
Thank you for purchasing our product. We are dedicated to produce the best products and offer the
best service.
WARNING!
This machine is mainly used in the welding industry. It will produce Electric & Magnetic
fields, so the operator should insure proper protection/screening is used.
To Next Page
Loading...
