Installing The Storage Box:
Open the lid of the storage box and line-up the four nut zerts with the holes on the right
hand inside of the barbecue body. Put a washer on each of the 4 bolts needed and mount
them through the barbecue body into the nut zerts. Use a socket wrench or crescent
wrench to tighten the bolts. Do not over tighten them.
Positioning The U-Shaped Firepot Cover And Angled Drip Pan:
Take time to become familiar with each of the various components and where they go
inside your barbecue.
Hanging The Grease Bucket:
Locate the grease drain tube coming out of the bottom of the right end of the barbecue
unit. Hang the grease bucket on the drain tube hook.
Drip Pan
Support Bar
Angled drip pan
V channel
grease catch
Grease
drain tube
Firepot cover
support
bracket
Short End
Angled drip pan
Long End
Angled drip pan
Firepot
U-shaped
firepot cover
To Next Page
