Offset Mowers 25 Trailblazer Attachments, LLC
423-405-5150 February 2019
5. Remove the left-side R-clip and t-handle retaining
pin.
6. Push the right side of the mower deck back towards
the tractor.
7. Push the left side of the mower deck back towards
the tractor.
8. Pull the mower deck to the side of the tractor.
9. Remove the R-clip from the latch pin and position
the mower parallel to the front of the tractor. The
latch pin will engage with the hole in the skid plate.
Replace the R-clip.
To Next Page
Loading...