TrailBlazer Attachments TB-ONE - Operation (Continued); Horizontal Offset Mowing Configuration

Offset Mowers 24 Trailblazer Attachments, LLC
February 2019 423-405-5150
c. Vertical mowing conguration. Refer to “5.6
Vertical Mowing Conguration” on page 26.
5.5 Horizontal Offset Mowing Configuration
1. Disconnect the supply hose from the tractor’s
manifold valve.
2. Disconnect both the supply and return hoses to the
mower.
3. Place the ends of the hoses in a place they will not
be contaminated by dirt.
4. Remove the right-side R-clip and t-handle retaining
pin.