TrailBlazer Attachments TB-ONE - Operation (Continued); Vertical Mowing Configuration

Offset Mowers 26 Trailblazer Attachments, LLC
February 2019 423-405-5150
10. Replace the right-side t-handle retaining pin and
R-clip.
11. Replace the left-side t-handle retaining pin and
R-clip.
12. Reconnect the hydraulic hoses.
13. Position the mower deck on the ground.
5.6 Vertical Mowing Configuration
1. Begin by following Steps 1 through 8 of the Offset
Mower conguration “5.5 Horizontal Offset Mowing
Conguration” on page 24.
2. Position the mower deck 90 degrees to the front of
the tractor.