INSTALLATION ON TO COUPLER
6
STEP 1: Check trailer height and ensure
installation is on a at, solid surface.
STEP 4: Using your trailer jack, lower the hitch
towards the unit’s rotating coupler and attach
rotation pin to secure in place.
STEP 2: Set up hitch ball and ball base.
Optional: For 2-5/16”
couplers, attach ball
converter to hitch ball.
STEP 5: Make sure the MV Pro is securely tightened and not rocking.
STEP 3: Attach hitch ball w/ ball base to
coupler and tighten - Don’t forget your
spanner wrench, and tighten that base!
LOCKED
To Next Page
Loading...
