7
Remove the battery cell seal.
8
Carefully open the package containing
the battery acid and hardware. Set the
hardware package aside for later use.
9
Remove the plastic cap from the battery
acid container. IMPORTANT: DO NOT
DISCARD THE PLASTIC CAP. Set the plastic
cap aside for later use.
10
Place the battery acid container on
top of the battery. Be sure to properly
align the container with the battery cells.
11
Gently press the battery acid con-
tainer into the battery cells. This will
puncture the foil caps and allow the battery
acid to flow.
12
The battery acid container needs to
be vented to allow the acid to flow
from the container easier. With a sharp knife
or thumbtack, poke a hole in the TOP of each
of the battery acid container’s cells.
To Next Page
Loading...
