Blazer4 150X/200X Set up instruction
12
2.15 Install the battery, battery cover: put the battery liquid into the
battery body, close the battery cover. Put the cushion plate into the
battery mount box. Connect the battery wires to the battery poles “+
to +; - to –”, cover them. Put the wired battery into the battery mount
box covered with the plastic protection cover, put the wires out
through the protection cover slot, fasten the battery with battery
strap. (Note: because the battery liquid and wiring of battery poles
are dangerous, only experienced adult can carry out this carefully
with protection measures (protective glove, Prevent electric
screwdriver).
Before driving please read the user manual of TrailMaster Go-kart
Blazer4 150X/200X carefully, you will be given with important safety
information and advices.
Thanks a lot for choosing TrailMaster Go-kart Blazer4 150X/200X, For
more other products of TrailMaster, please visit
www.bvpowersports.com !
BV Powersports, LLC
To Previous Page
Loading...
