1. Check tire pressure with tire gauge in toolbox, ensuring tire pressure
at 15-20 psi.
2. Check whether the rim is bent or damaged.
3. Check the battery power.
4. Check whether the drive chain needs lubrication or fixed.
5. Check whether brake parts can work normally.
6. Check if all screws, nuts and other parts are loose.
7. Check if accelerator can be rotated freely a
positioned after release
8. Ensure steering wheel is flexible turned.
Crash accidents or even serious injury or death can be caused if
improper maintenance is made. Be sure to check the kart before t ride,
ensuring kart is in good condition to make full use of electric kart.
Basic operation
The power of electric kart is 650 watts with voltage 48V. The power can not be
underestimated to prevent harm.
Step One: Turn on the power
The kart is equipped with power lock switch, which is convenient to operate
for owners. The switch can cut off all power. Turn on the switch, the power will
be connected.
In case of nobody on the kart, do not rotate the accelerator. Or
the kart will initiatively move forward which may cause great danger.
Turn off the switch, the kart will slowly stop. It should be noted that the key
should be removed from kart after turning off the switch.
To Next Page
Loading...