127
Tighten inner air filter nut secure-
ly with fingers. Reinstall cover
and nut.
128
Locate the shift cam. Tighten both
cables with a 12mm wrench.
NOTE: This is ONLY on the Mid XRX-R
129
Cut and remove all strings on can-
opy top and pad covers and dis-
pose.
130
You’re almost done! Just a few
pre-drive items to inspect, and
you will be ready to ride your new go-kart.
131
Locate oil dipstick on front of en-
gine behind the driver’s seat.
With the go-kart sitting on level ground, the
oil level should be to the top of the threads. If
not, fill with 10W30 oil.
132
Fill fuel tank 3/4 full with premium
high octane fuel.
NOTE: Follow all gasoline handling pre-
cautions and fuel can.
GOKARTMASTERS.COM
GOKARTMASTERS.COM GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
To Next Page
Loading...
