37
Tighten ALL of the bar bolts previ-
ously installed with a 10mm & 12mm
wrenches.
38
Locate the fuel tank.
NOTE: On some models, the fuel tank
is already installed on the engine. Check tank
mounting hardware to insure tight. Proceed
to Step 47.
39
Locate 4 long bolts and nuts and fuel
hose clamp.
40
Place the fuel tank onto the rear rack
with decal to the rear.
41
Install the 4 bolts and nuts into the
tank.
42
Tighten with a 10mm & 12mm
wrenches.
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
To Next Page
Loading...
