97
Hold the rod with a 10mm wrench
and loosen the outer jam nut
(standard thread).
98
Now, loosen the inner nut
(backwards thread).
GOKARTMASTERS.COM
GOKARTMASTERS.COM
99
Now, adjust the wheel in or out by
turning the rod.
GOKARTMASTERS.COM
100
Hold the rod with a wrench and
tighten the jam nuts securely.
101
Repeat Steps 92-100 for the driv-
er’s side.
GOKARTMASTERS.COM
GOKARTMASTERS.COM
102
For final front end alignment pro-
cedure, the front wheels should
turn toward each other approximately 1/4” to
1/2”.
GOKARTMASTERS.COM
To Next Page
Loading...
