Concrete Encounter
CME 4
for measuring moisture
content … instantly … in
concrete floors and floor
screeds without the need to
drill or damage the surface.
HOW IT WORKS
Co-planer electrodes on the base
of the Concrete Encounter CME4
transmit parallel low frequency
signals calibrated to give average
moisture content by comparing
the change in impedance between
damp and acceptably dry
concrete.
SPECIFICATIONS
Size: 150mm x 85 mm x 38 mm
6" x 3" x 1.5"
Weight: 298 g (10.5oz)
Construction: ABS Body
Power: 9 volt PP3 Battery
Display: Analogue
Measuring Range:
To over 6% moisture content for Concrete.
0 to 10 comparative for Gypsum floor screed.
0 to 100 Reference scale.
SCREEDS AND CONCRETE FLOORS
MUST BE DRY BEFORE THE FLOOR
COVERING IS INSTALLED
•
Regular checking of moisture content during the drying out period of a
new concrete floor or floor screed is important to ensure it has reached
sufficient dryness to accept the floor covering.
•
Excess moisture in the concrete could cause latent problems such as
condensation or failure of the adhesive under the floor covering.
•
The Concrete Encounter CME4 will give you an instant reading of
moisture content to over 6% for Concrete and 0 to 10 comparative for
Gypsum floor screeds enabling you to make an informed decision on
when to install the floor covering.
•
To use, simply switch on and press down the instrument firmly against
the surface. Carry out unlimited non-destructive tests in seconds without
the need to drill or damage the concrete.
DESIGNED FOR THE
FLOORING INDUSTRY
Tramex has been designing, manufacturing and marketing worldwide, non-
destructive moisture meters for more than 30 years. You can, therefore,
purchase with confidence assured, that you are getting the latest, most
practical and useful, moisture measurement instrument available to the
flooring industry. Recommended by many leading manufacturers of floor
covering materials and flooring adhesives.
WARRANTY
The Concrete Encounter CME4 carries a full parts and labour warranty for a
period of one year from the date of first purchase. In addition the purchaser
is entitled to a full refund if the instrument does not give full satisfaction and
is returned in original condition within 30 days of purchase.
FOR MORE INFORMATION ON THE ABOVE OR ANY OF THE TRAMEX RANGE OF MOISTURE
MEASUREMENT AND DETECTION INSTRUMENTS PLEASE CALL, FAX, E-MAIL OR WRITE TO:
TRAMEX LIMITED
Station House, Shankill Business Center,
Shankill, Co. Dublin, Ireland.
Tel: +353-1-282 3688
Fax: +353-1-282 7880
E-mail: sales@tramex.ie
U.S.A and CANADA - TRAMEX LIMITED
c/o Black Hawk Sales Inc.
28 Pin Oak Drive, Littleton, CO 80127
Tel: 303 972 7926
Fax: 303 972 7106
E-mail: dennisw@tramexltd.com
Web Site: www.tramexltd.com
Signals are transmitted into the Concrete
Product Data Sheet-CME 1004
To Next Page
Need help?
General
