TRAMEX CME5 - Introduction to Concrete Moisture Encounter CME5; Why should a test be done?; When should a test be done?

•
•
•
•
•
•
•
Middle Scale - Yellow - for use on Gypsum
Floor/Screeds.
Reference readings replicating measure-
ments using concrete scale on concrete &
sand/cement floors/screeds.
Bottom Scale - 0-100 - intended for use with
materials other than concrete & screeds, such
as stone & tiles etc.
This scale is for reference only and is not
to be interpreted as moisture content or
relative humidity.
CALIBRATION & WARRANTY
Obtain Warranty online:
tramexmeters.com/register
Annual calibrations are recommended as best
practice to ensure continued accuracy and
reliability. Calibration Check Plates can be
purchased for more regular checks.
BLUETOOTH
Press to switch Bluetooth ON/OFF. Read-
ings will be sent to the Tramex App on your
mobile device.