TRAMEX CME5 User Manual

6
CONCRETE MOISTURE ENCOUNTER 5 USER GUIDE
- Back to Top -
INSTRUMENT FEATURES
Your Concrete Moisture Encounter CME5 employs
advanced analog and digital technology to enable the
incorporation of the many features listed below.
• Three simple push controls - On/Off; Hold;
Bluetooth; with corresponding LED indicators.
• Concrete moisture readings, 0% to 6%, are dis-
played on a clear easy to read moving coil meter
with linear scale.
• Comparative or qualitative readings for gypsum
and other floor screeds are shown on a 0 to 10
scale.
• A reference scale of 0 to 100 .
• To conserve battery life, the instrument automati-
cally powers OFF after 5 minutes of inactivity.
• Power remains on if a change in meter reading is
detected or any button is pressed.
• The 3 LED indicators:
ƕ The ON LED illuminates when the ON/OFF button
is pressed and remains on until the Concrete Mois-
ture Encounter CME5 automatically powers off.
ƕ The Hold LED flashes when HOLD is selected.
ƕ If the batteries are nearing end of life, all LEDs
flash sequentially for 3 seconds at each power ON
to indicate that the batteries should be replaced.

TRAMEX CME5 Specifications

General

Brand	TRAMEX
Model	CME5
Category	Measuring Instruments
Language	English